dmesg - AMD Radeon 9600
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-19-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #30-Ubuntu SMP Wed May 1 16:36:13 UTC 2013 (Ubuntu 3.8.0-19.30-generic 3.8.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003ffbffff] usable
BIOS-e820: [mem 0x000000003ffc0000-0x000000003ffcffff] ACPI data
BIOS-e820: [mem 0x000000003ffd0000-0x000000003fffffff] ACPI NVS
BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.3 present.
DMI: System manufacturer System Product Name/P5P800-VM, BIOS 0701 10/20/2006
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3ffc0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x3616e000-0x370aefff]
ACPI: RSDP 000faf50 00021 (v02 ACPIAM)
ACPI: XSDT 3ffc0100 0003C (v01 A M I OEMXSDT 10000620 MSFT 00000097)
ACPI: FACP 3ffc0290 000F4 (v03 A M I OEMFACP 10000620 MSFT 00000097)
ACPI: DSDT 3ffc0400 03552 (v01 A0495 A0495036 00000036 INTL 02002026)
ACPI: FACS 3ffd0000 00040
ACPI: APIC 3ffc0390 0006C (v01 A M I OEMAPIC 10000620 MSFT 00000097)
ACPI: OEMB 3ffd0040 0003F (v01 A M I OEMBIOS 10000620 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
131MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x3ffbffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0x3ffbffff]
On node 0 totalpages: 261967
free_area_init_node: node 0, pgdat c18f6100, node_mem_map f73fd200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 264 pages used for memmap
HighMem zone: 33466 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 3 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000
PM: Registered nosave memory: 00000000000e1000 - 0000000000100000
e820: [mem 0x40000000-0xffb7ffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f73be000 s35008 r0 d22336 u57344
pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259919
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
allocated 2096512 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0003ffc0)
Memory: 1009968k/1048320k available (6251k kernel code, 37900k reserved, 2973k data, 784k init, 134920k highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1903000 - 0xc19c7000 ( 784 kB)
.data : 0xc161ad70 - 0xc19023c0 (2973 kB)
.text : 0xc1000000 - 0xc161ad70 (6251 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 2794.880 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5589.76 BogoMIPS (lpj=11179520)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU0: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
tlb_flushall_shift: 6
ACPI: Core revision 20121018
ftrace: allocating 26116 entries in 52 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Celeron(R) CPU 2.80GHz (fam: 0f, model: 04, stepping: 09)
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version: 0
... bit width: 40
... generic registers: 18
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 0
... event mask: 000000000003ffff
Brought up 1 CPUs
smpboot: Total of 1 processors activated (5589.76 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x3ffd0000-0x3fffffff] (196608 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x40010000-0xffefffff] (ignored)
PCI: root bus 00: using default resources
pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:2570] type 00 class 0x060000
pci 0000:00:00.0: Enabling MCH 'Overflow' Device
pci 0000:00:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: [8086:2571] type 01 class 0x060400
pci 0000:00:06.0: [8086:2576] type 00 class 0x088000
pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
pci 0000:00:1d.0: [8086:24d2] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0xb800-0xb81f]
pci 0000:00:1d.1: [8086:24d4] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0xc000-0xc01f]
pci 0000:00:1d.2: [8086:24d7] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0xc400-0xc41f]
pci 0000:00:1d.3: [8086:24de] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 20: [io 0xc800-0xc81f]
pci 0000:00:1d.7: [8086:24dd] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xfbdffc00-0xfbdfffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
pci 0000:00:1f.0: [8086:24d0] type 00 class 0x060100
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.1: [8086:24db] type 00 class 0x01018a
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0xfc00-0xfc0f]
pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
pci 0000:00:1f.5: [8086:24d5] type 00 class 0x040100
pci 0000:00:1f.5: reg 10: [io 0xb400-0xb4ff]
pci 0000:00:1f.5: reg 14: [io 0xb000-0xb03f]
pci 0000:00:1f.5: reg 18: [mem 0xfbdff800-0xfbdff9ff]
pci 0000:00:1f.5: reg 1c: [mem 0xfbdff400-0xfbdff4ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [1002:4152] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:00.0: reg 14: [io 0xd000-0xd0ff]
pci 0000:01:00.0: reg 18: [mem 0xfbee0000-0xfbeeffff]
pci 0000:01:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:4172] type 00 class 0x038000
pci 0000:01:00.1: reg 10: [mem 0xe0000000-0xefffffff pref]
pci 0000:01:00.1: reg 14: [mem 0xfbef0000-0xfbefffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xfaffffff pref]
pci 0000:02:0d.0: [10ec:8139] type 00 class 0x020000
pci 0000:02:0d.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:02:0d.0: reg 14: [mem 0xfbfffc00-0xfbfffcff]
pci 0000:02:0d.0: supports D1 D2
pci 0000:02:0d.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x3ffc0000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:04: [io 0x0290-0x0297] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x0800-0x087f] has been reserved
system 00:05: [io 0x0400-0x041f] has been reserved
system 00:05: [io 0x0480-0x04bf] has been reserved
system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:05: [mem 0xffb00000-0xffbfffff] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0x00100000-0x3fffffff] could not be reserved
system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xfaffffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 02]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xfaffffff pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 16 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15620k freed
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1368585738.648:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 1739
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
isapnp: Scanning for PnP cards...
agpgart-intel 0000:00:00.0: Intel 865 Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 16 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbdffc00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 91de7a0b580f416d81726d1f7134a3ecef081207'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
ata2.00: ATAPI: _NEC DVD_RW ND-1300A, 1.0C, max UDMA/33
rtc_cmos 00:01: setting system clock to 2013-05-15 02:42:19 UTC (1368585739)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1.00: HPA detected: current 312579695, native 312581808
ata1.00: ATA-6: ST3160023A, 8.01, max UDMA/100
ata1.00: 312579695 sectors, multi 16: LBA48
isapnp: No Plug & Play device found
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST3160023A 8.01 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-1300A 1.0C PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 sda6 > sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 784k freed
Write protecting the kernel text: 6252k
Write protecting the kernel read-only data: 2432k
NX-protecting the kernel data: 3988k
udevd[94]: starting version 175
Disabling lock debugging due to kernel taint
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:02:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
usb 2-1: new low-speed USB device number 2 using uhci_hcd
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:02:0d.0 eth0: RealTek RTL8139 at 0x0001e800, 00:17:31:57:1b:c5, IRQ 23
tsc: Refined TSC clocksource calibration: 2794.830 MHz
Switching to clocksource tsc
usb 2-1: New USB device found, idVendor=046d, idProduct=c312
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Multimedia Keyboard
usb 2-1: Manufacturer: LITEON Technology
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.0-1/input0
usb 3-2: new low-speed USB device number 2 using uhci_hcd
usb 3-2: New USB device found, idVendor=046d, idProduct=c03f
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB-PS/2 Optical Mouse
usb 3-2: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3
hid-generic 0003:046D:C03F.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2/input0
EXT3-fs (sda1): recovery required on readonly filesystem
EXT3-fs (sda1): write access will be enabled during recovery
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 459993
ext3_orphan_cleanup: deleting unreferenced inode 40790
ext3_orphan_cleanup: deleting unreferenced inode 40735
ext3_orphan_cleanup: deleting unreferenced inode 40734
EXT3-fs (sda1): 4 orphan inodes deleted
EXT3-fs (sda1): recovery complete
EXT3-fs (sda1): mounted filesystem with ordered data mode
Adding 4081660k swap on /dev/sda6. Priority:-1 extents:1 across:4081660k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[306]: starting version 175
lp: driver loaded but no devices found
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_rng: FWH not detected
lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
[drm] Initialized drm 1.1.0 20060810
type=1400 audit(1368571353.445:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=483 comm="apparmor_parser"
type=1400 audit(1368571353.449:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=483 comm="apparmor_parser"
type=1400 audit(1368571353.449:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=483 comm="apparmor_parser"
microcode: CPU0 sig=0xf49, pf=0x10, revision=0x3
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RV350 0x1002:0x4152 0x148C:0x2076).
[drm] register mmio base: 0xFBEE0000
[drm] register mmio size: 65536
agpgart-intel 0000:00:00.0: AGP 3.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
radeon 0000:01:00.0: putting AGP V3 device into 8x mode
radeon 0000:01:00.0: GTT: 256M 0xC0000000 - 0xCFFFFFFF
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:00.0: VRAM: 256M 0x00000000D0000000 - 0x00000000DFFFFFFF (128M used)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 445726 kiB
[TTM] Zone highmem: Available graphics memory: 513186 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 256M of GTT memory ready.
[drm] radeon: 1 quad pipes, 1 Z pipes initialized.
radeon 0000:01:00.0: WB disabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000000 and cpu addr 0xf844e000
[drm] Loading R300 Microcode
[drm] radeon: ring at 0x00000000C0001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
[drm] DFP1: INTERNAL_TMDS1
[drm] Connector 2:
[drm] SVIDEO-1
[drm] Encoders:
[drm] TV1: INTERNAL_DAC2
[drm] Possible lm63 thermal controller at 0x4c
EXT3-fs (sda1): using internal journal
snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[drm] fb mappable at 0xD0040000
[drm] vram apper at 0xD0000000
[drm] size 5242880
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
intel8x0_measure_ac97_clock: measured 54875 usecs (2644 samples)
intel8x0: clocking to 48000
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda4): using internal journal
EXT3-fs (sda4): mounted filesystem with ordered data mode
init: failsafe main process (687) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1368571371.409:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=801 comm="apparmor_parser"
type=1400 audit(1368571371.409:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=801 comm="apparmor_parser"
init: avahi-cups-reload main process (792) terminated with status 1
type=1400 audit(1368571371.421:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=802 comm="apparmor_parser"
type=1400 audit(1368571371.425:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=802 comm="apparmor_parser"
type=1400 audit(1368571371.433:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=803 comm="apparmor_parser"
type=1400 audit(1368571371.433:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=803 comm="apparmor_parser"
type=1400 audit(1368571371.449:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=806 comm="apparmor_parser"
type=1400 audit(1368571371.449:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=806 comm="apparmor_parser"
type=1400 audit(1368571371.453:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=806 comm="apparmor_parser"
ppdev: user-space parallel port driver
type=1400 audit(1368571371.533:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=809 comm="apparmor_parser"
8139too 0000:02:0d.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1